If you have an asphalt driveway, then you know that it needs to be sealcoated every few years in order to protect it from the elements and keep it looking nice. Sealcoating is a process that coats the surface of the driveway with a sealant that helps to protect it from water, UV rays, and other damage. If you are thinking about sealcoating your driveway, then this blog post is for you! We will discuss the steps involved in sealcoating your asphalt driveway so that you can do it yourself. Information can be found here.
Sealcoating your driveway is a great way to protect it from the elements and extend its lifespan. It also gives it a nice, clean appearance. Here are the basic steps for sealcoating your asphalt driveway: First, you’ll need to clean the surface of your driveway. This can be done with a power washer or a garden hose and some elbow grease. Be sure to let the surface completely dry before proceeding. Next, you’ll need to repair any cracks or holes in the surface. You can do this with an asphalt patching compound and a putty knife. Once the repairs are made, be sure to smooth them out so they’re level with the rest of the surface. Now you’re ready to sealcoat! You’ll need to purchase an asphalt sealer from your local home improvement store. Be sure to read the instructions on the label, as there are typically different application methods for different types of sealers. Once you’ve applied the sealer, you’ll need to let it dry completely before walking or driving on it. Depending on the weather and temperature, this can take anywhere from a few hours to a full day. And that’s it! By following these simple steps, you can have a beautiful and durable finish on your asphalt driveway. See here for information about How to Sealcoat Your Asphalt Driveway for Protection in Richmond, VA.